Engine Oil Filter, 6678233

  • Full-flow, spin-on design which provides easy servicing and reduces risk of contamination
  • Durable and thicker metal filter housing to prevent failure
  • Treated media traps larger dirt particles and other contaminants
  • Filter media is uniformly pleated and up to 40% thicker than "will-fit" filters
  • Heavy-duty coil spring to maintain media cartridge seal
  • Louvered inner liner allows maximum oil flow to the engine
  • Maintenance interval: 500 hours
  • Available in your maintenance kits
In stock

Genuine Bobcat oil filters are engineered to remove any harmful contaminants from engine oil during normal and severe applications. Installation Instructions: Apply a thin film of oil to the gasket. Tighten 2/3 turn after gasket contacts sealing surface. For your convience, this filter is included in the maintenance kit for your machine.

More Information

Outer Diameter: 3.66 Inches (93 MM) Thread Size: 3/4-16 UN

Length: 3.66 Inches (93 MM)

Gasket OD: 2.83 Inches (72 MM)

Gasket ID: 2.44 Inches (62 MM) Efficiency 99%: 40 MICRON

Anti-Drainback Valve: Yes

Bypass Valve: Yes

Bypass Valve Setting LR: 20 PSI (1.38 Bar) Bypass Valve Setting HR: 28 PSI (1.93 Bar)

  • Rated Flow: 55L/min
  • Fluid: SAE20-30, 10W-30, 40
  • -30 degrees C to 120 degrees C
  • Maintenance Internal: 500 hours
Model Compatibility

Articulated Loaders: WL350, WL440

Loaders:A300, A770, S220, S250, S300, S330, S630, S650, S750, S770, S850, T250, T300, T320, T630, T650, T750, T770, T870

Telescopic handlers:T2250

Versahandlers: V417

Check the Bobcat Online Parts Catalog to ensure the correct part for your equipment. 

Write Your Own Review
You're reviewing:Engine Oil Filter, 6678233
Your Rating
©2018 Bobcat Company. All rights reserved.