Male Flat Face Coupler - 1/2" body, 1/2" NPT thread, 7411976
Flat faced couplers have a safety locking sleeve fitted as standard to prevent accidental disconnection. Easily wiped clean. Flat face design allows for minimal inclusion of air and contaminents during connection and prevention of fluid loss during disconnection. Easily wiped clean.
Used on the end of the hoses of powered attachments and coupled to your machine's hydraulics. Bobcat male flat face couplers are made to the ISO 16028 standard.
|Body Size||1/2" body|
|Thread Size||1/2" NPT thread|
|Type||Male Flat Face Coupler|
- Zinc nickel plated with corrosion protection
- Up to 400 bar working pressure
- Designed for hammer circuits
- Free of Chrome 6
- Exceeds ISO 16028 specifications
- Tested for 1200 hours in a salt spray chamber with no signs of rust
- Smooth flow passage
Competitors and Replacement Part Numbers
FFH08 12NPT M
FFI12 NPT M
M.A13 1/2 NPT
M.A13ZF 1/2 NPT
M.FIRG 12A NPT
|ZSI Foster Coupler||
Compatible with most brands of machines and can replace most brands of couplers including Faster, Holmbury, and Parker. Verify specs and specific model compatibility prior to ordering.
WARNING: This product can expose you to chemicals including lead and lead compounds, mineral oils, and phthalates which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov